TAPPI Over The Wire Paper 360
Past Issues | Printer Friendly | TAPPI.org | Advertise | Buyers Guide | Travels with Larry Archive Facebook Twitter LinkedIn
       

Register Today and Tune in to Spray Transfer Efficiency Webinar!

Print Print this Article | Send to Colleague

Join us for the Spray Transfer Efficiency webinar taking place Thursday, June 8th 11:00 AM – 12:00 PM (ET). Learn about fast moving webs that create big problems when it comes to applying coatings. The air boundary layer created from the high-speed web makes spraying coatings in small amounts exceedingly difficult. This generally means that you will have a low transfer efficiency when spraying. Transfer efficiency can be defined as the total amount of product applied versus the total amount sprayed out of the nozzle. In industry you will find many ways that have been used to try to combat the air boundary layer created from high-speed webs. You might ask yourself, though, which is the most effective? In this webinar, we explore several different methods for trying to break through the air boundary layer, and see which method yields the best results for transfer efficiency.

Meet presenters:

Dr. Kyle M. Bade
Research Engineer

Kyle has over 15 years of experience with spray analysis and nozzle technology covering a wide range of industrial and agricultural applications. He is the Global Technical Leader of R&D efforts at Spraying Systems Co., Project Manager for the Spray Analysis division, and a Development Engineer and Director of the SprayScan® Suite of diagnostic products. Kyle has a Ph.D. in Mechanical Engineering and is an accomplished author (AAS, JFM, PoF, conferences), executive board member (ILASS), and guest journal editor (AAS).

Bernard Pyzdrowski
Project Engineer

Bernard has worked for Spraying Systems Co. since 2016. He is a Project Engineer focused exclusively in the Pulp and Paper Industry. He is experienced with various mill operations such as cleaning, trimming, lubricating, coating, drying operations and more. Bernard is involved in product development, process improvement and technical support. He holds a bachelor’s degree in mechanical engineering from the Milwaukee School of Engineering.

Webinar attendance is free and open to everyone, but registration is required.
There is still to reserve your space today!

Sponsored by:

 

Back to TAPPI: Over The Wire

Share Share on Facebook Share on Twitter Share on LinkedIn