Ingersoll Rand® Introduces IQV20 Series W7152 1/2" Impact Wrench

The Ingersoll Rand® IQV20 Series™ W7152 1/2” Impact Wrench is the most powerful cordless impact wrench in its class. It delivers 1,500 foot-pounds of nut-busting torque and 1,000 foot-pounds of max torque. The W7152 is IPX6 rated and has a patented steel-reinforced nylon casing to withstand jets of water and prevent against chemical exposure. Paper and pulp maintenance technicians can rinse the W7152 with water without damaging the tool.

The W7152 has four power and control settings. Each setting operates at maximum reverse torque, so technicians don't need to switch settings to remove a stubborn fastener. The four power modes in forward control include:  

• Max Power: The max power setting delivers up to 1,000 foot-pounds of max torque, so technicians do not have to switch tools when changing pumps that are fitted with a flange pipe or removing bolts from the doors of paper mashers.
• Half Power: The half power setting tightens fasteners at up to 530 foot-pounds of torque for applications that don’t require maximum torque speeds. 
• Wrench Tight: Instead of changing to a hand wrench, technicians can use the wrench tight setting to pre-tighten bolts at 35-110 foot-pounds of torque. In this setting, the tool automatically shuts off, so bolts are not over-torqued.
• Hand Tight: The hand tight setting turns slowly, creating a snug fit to hold a bolt in place. When the tool reaches the point of impact, it also shuts off to avoid over-torqued fasteners.

The W7152 is a compact 8.1” long from tip to tail and has a 360-degree shadowless task light to provide exceptional access and increased visibility in hard-to-reach spaces. The Ingersoll Rand IQV power control system gives maintenance technicians the power they want and the control they need to complete jobs accurately and quickly. The compact brushless motor transfers energy efficiently, delivering accurate torque for repair and maintenance applications.

Other advantages of the W7152 1/2” Impact Wrench include:

• Chemical-resistant composite housing and a patented steel-reinforced frame to withstand the harshest working conditions.
• A steel reinforced frame and an optimized internal mechanism to provide maintenance technicians with the power they need without adding extra weight to the tool.
• A 20-volt battery compatible with the Ingersoll Rand IQV20 Series battery system.
• The shadowless, LED task light has four settings for high-, medium- and low-light environments as well as an off mode.

The W7152 is available with a 3/4” anvil for large bolting applications. To learn more about the Ingersoll Rand W7152 1/2” Impact Wrench, visit irtools.com.

TAPPI
http://www.tappi.org/