Print this article | Send to Colleague

T 200 sp-15 "Laboratory beating of pulp (Valley beater method)" (Revision)

T 213 om-15 "Dirt in pulp - chart method" (Revision)

T 248 sp-15 "Laboratory beating of pulp (PFI mill method)" (Revision)

T 259 om-15  "Species identification of nonwood plant fibers" (Revision and reclassification as an Official Method)

T 401 om-15 "Fiber analysis of paper and paperboard" (Revision)

T 409 sp-15 "Machine direction of paper and paperboard" (Revision)

T 454 om-15 "Turpentine test for voids in glassine and greaseproof papers" (Revision)

T 546 om-15 "Machine-direction grammage variation measurement (gravimetric method)" (Revision)

T 555 om-15  "Roughness of paper and paperboard (print-surf method)" (Revision)

T 558 om-15 "Surface wettability and absorbency of sheeted materials using an automated contact angle tester" (Revision)

T 563 om-15 "Equivalent black area (EBA) and count of visible dirt in pulp, paper and paperboard by image analysis" (Revision)

T 573 sp-15 "Accelerated temperature aging of printing and writing paper by dry oven exposure apparatus" (Revision)

T 650 om-15 "Solids content of black liquor" (Revision)

T 1007 sp-15 "Sample location for fiber glass mat sheets" (Revision)

T 1008 sp-15 "Test conditions for fiberglass mat test methods" (Revision)

T 1012 om-15 "Moisture content of fiber glass mats" (Revision)

T 1015 sp-15 "Fiber glass mat uniformity (visual defects)" (Revision)

TIP 0404-02 "Measurement of dryer condensing rates (batch method)" (Revision)

TIP 0404-04 "Recommended tensions in dryer fabrics" (Revision)

TIP 0404-20 "Physical characterization of press fabrics: basis weight, air permeability, void volume under loading and pressure uniformity" (Revision)

TIP 0404-50 "Paper machine room ventilation guidelines" (Revision)

TIP 0404-64 "Press fabric guiding" (Revision)

TIP 0410-05 "Head of stock behind slice (head/jet relationships)" (Revision)

UM 542 "Amount of coating on mineral-coated paper" (Revision)

UM 554 "Polystyrene in paper products" (Revision)

UM 555 "Testing of grease-repellant treated paper" (Revision)

Special note:  Documents appearing in the TAPPI online version of the Standards, TIPs and Useful Methods are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards,TIPs, and Useful Methods and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)