October 2018

TIPs - Technical Information Papers published

Here is the list of TAPPI TIPs reviewed and recently published. The information in parentheses indicates if the TIP was reaffirmed or revised. The name of the Working Group Chair (WGC) is also listed. You will find here the brand new TIPs published by TAPPI, which are assigned with "New".

TIP 0402-19 "Guidelines for nondestructive examination of suction roll shells" (Revised) - WGC: Douglas Sherman

TIP 0402-21 "Ultrasonic technician performance test for boiler tube thickness measurement" (Revised) - WGC: Max Moskal

TIP 0404-25 "Through drying" (Revised) - WGC: Greg Wedel

TIP 0420-14 "Guide for increasing the maximum allowable working pressure of cast iron, ASME constructed paper machine dryers" (Revised) - WGC: Max Moskal

TIP 0425-05 "Guidelines for usage of MAP on raw Yankee surfaces" (New) - WGC: Jack Allen

TIP 0609-01 "Common or local names for a nonwood fiber raw material" (New) - WGC: Robert Hurter

Standards approved for publication

See below the list of TAPPI Standards recently approved for publication by the Standards Advisory Review Group (SARG), in the last meeting of October 3, 2018:

(* indicates Standards eligible for submission as American National Standards)

1. *T 205 "Forming handsheets for physical tests of pulp"

2. *T 218 "Forming handsheets for reflectance testing of pulp (Büchner funnel procedure)"

3. *T 266 "Determination of sodium, calcium, copper, iron and manganese in pulp and paper by atomic absorption"

4. *T 271 "Fiber length of pulp and paper by automated optical analyzer using polarized light"

5. *T 275 "Screening of pulp (Somerville-type equipment)"

6. *T 491 "Water immersion number of paperboard"

7. *T 551 "Thickness of paper and paperboard (soft platen method)"

8. *T 568 "Physical area of sub-visible contraries in pulp, paper, and paperboard by image analysis"

9. T 676 "Viscosity of starch and starch products" – WITHDRAWN

10. T 818 "Ring crush of paperboard (flexible beam method)"

11. *T 834 "Determination of containerboard roll hardness"

12. *T 1217 "Photometric linearity of optical properties instruments"

13. *T 1218 "Calibration of reflectance standards for hemispherical geometry"

14. *T 1500 "Optical measurements terminology (related to appearance evaluation of paper)"

15. *T 1501 "Training standard for paper machine tender"

The approved Standards will be available on TAPPI website within the next 30 days.

Special note: Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request for TIPs to tip@tappi.org or for Standards to standards@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)