| Archive | Advertise | tappi.org | October 2018 |
Print this article | Send to Colleague
The Standard-Specific Interest Groups (SSIGs) for the following standards are in need of additional members. These groups may or may not have ballots currently open.
All Standard-Specific Interest Groups (SSIG) require a minimum of 10 members in order to ballot and vote on a draft of a method. The following test methods do not have the required minimum number of member to initiate a ballot:
SSIGs that need 1 member:
T 252 pH and electrical conductivity of hot water extracts of pulp, paper, and paperboard
T 434 Acid-soluble iron in paper
T 438 Zinc and cadmium in paper
T 545 Cross-machine grammage profile measurement (gravimetric method)
T 578 Accelerated light aging of printing and writing paper by xenon-arc exposure apparatus
T 613 Analysis of caustic soda
T 619 Analysis of salt cake
T 632 Analysis of sodium silicate
T 692 Determination of suspended solids in kraft green and white liquors
T 1217 Photometric linearity of optical properties instruments
T 1218 Calibration of reflectance standards for hemispherical geometry
SSIGs that need 2 members:
T 493 Identification and determination of melamine resin in paper
T 621 Analysis of rosin
T 622 Analysis of sodium hydrosulfite
T 628 Analysis of rosin size
T 656 Measuring, sampling, and analyzing white waters
T 656 Measuring, sampling, and analyzing white waters
SSIGs that need 3 members:
T 421 Qualitative (including optical microscopic) analysis of mineral filler and mineral coating of paper
SSIGs that need 4 or more members:
T 495 Bending number of paperboard
SSIGs that have the minimum amount of members but are inviting new members to join
T 836 Bending stiffness, four point method
Participating in a SSIG is free and open to any industry expert interested. Join now!
If no progress is made on balancing these SSIGs, then the respective methods may be considered for withdrawal at the next Q&SMC meeting. If you have an interest in becoming a member of either of these SSIGs please contact standards@tappi.org
TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.
TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)
