Archive | Advertise | tappi.org February 2019

Print Print this article | Send to Colleague

Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item.

0416 - Steam & Power/Energy Management
1/28/19 TIP 0416-10 Stripping of kraft pulping process condensates: regulations, design and operation. WGC: L. Paul Johnson

0402 - Corrosion & Materials Engineering
1/30/19 TIP 0402-35 Post-fabrication cleaning of stainless steel in the pulp and paper industry. WGC: Michael Lykins

0502 - Papermakers
2/5/19 TIP 0502-16 Pilot paper and wet laid nonwoven machines. WGC: Thomas E. Rodencal

If you would like to participate in the Working Group to review any of these TIPs, please write to tip@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)