Print this article | Send to Colleague

Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting.

T 261 cm-10 Fines fraction by weight of paper stock by wet screening (3/27/2020)
T 277 sp-14 Macro stickies content in pulp: the “pick-up” (3/23/2020)
T 401 om-15 Fiber analysis of paper and paperboard (3/21/2020)
T 409 sp-15 Machine direction of paper and paperboard (3/20/2020)
T 480 om-15 Specular gloss of paper and paperboard at 75 degrees (3/23/2020)
T 534 om-15 Brightness of clay and other mineral pigments (d/0 diffuse) (3/27/2020)
T 546 om-15 Machine-direction grammage variation measurement (gravimetric method) (3/21/2020)
T 553 om-15 Alkalinity of paper as calcium carbonate (alkaline reserve of paper) (3/26/2020)
T 555 om-15 Roughness of paper and paperboard (print-surf method) (3/28/2020)
T 558 om-15 Surface wettability and absorbency of sheeted materials using an automated contact angle tester (3/28/2020)
T 567 om-15 Determination of effective residual ink concentration (ERIC) by infrared reflectance measurement (3/29/2020)
T 684 om-15 Gross heating value of black liquor (3/26/2020)
T 803 cm-10 Puncture test of containerboard (3/29/2020)
T 1007 sp-15 Sample location for fiber glass mat sheets (3/20/2020)
T 1012 om-15 Moisture content of fiber glass mats (3/20/2020)
T 1015 sp-15 Fiber glass mat uniformity (visual defects) (3/21/2020)

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)