Print this article | Send to Colleague

Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item.

0304 Process Control & Quality Assurance

04/14/2020 - TIP 0304-24 Calibration and maintenance of the burst tester WGC: James Pauw
04/14/2020 - TIP 0304-72 Critical properties to consider when unitizing WGC: Greg McKinney

0305 Production

04/14/2020 - TIP 0305-54 Material handling considerations for flexo folder gluers WGC: John Buzzell

0402 - Corrosion and Materials Engineering

04/07/2020 - TIP 0402-32 Guidelines for thermal spray coatings installed to prevent corrosion in pulp mill process equipment WGC: Michael Lykin

0416 - Energy, Recovery and Recaust

04/14/2020 - TIP 0416-08 Guidelines for replacement of generating bank tubes with expanded joints in two-drum boilers WGC: Michael Lykin

If you would like to participate in the Working Group to review any of these TIPs, please write to tip@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)