| Archive | Advertise | tappi.org | March 2021 |
Print this article | Send to Colleague
The Standard-Specific Interest Groups (SSIGs) for the following Standards are in need of additional members. These groups may or may not have ballots currently open.
All Standard-Specific Interest Groups (SSIG) require a minimum of 10 members in order to ballot and vote on a draft of a method. The following test methods do not have the required minimum number of members to initiate a ballot:
Alkaline Pulping
T 692 om-13 Determination of suspended solids in kraft green and white liquors
Draft 2 Current SSIG Count = 8
Chemical Properties
T 223 cm-10 Pentosans in wood and pulp
Automatic review - 10/2019 Current SSIG Count = 5
T 244 cm-11 Acid-insoluble ash in wood, pulp, paper, and paperboard
Automatic review - 9/2020 Current SSIG Count = 5
T 252 om-16 pH and electrical conductivity of hot water extracts of pulp, paper, and paperboard
Automatic review - 10/2020 Current SSIG Count = 8
T 429 cm-10 Alpha-cellulose in paper
Automatic review - 10/2019 Current SSIG Count = 4
T 434 cm-10 Acid-soluble iron in paper
Automatic review - 10/2019 Current SSIG Count = 3
T 435 om-16 Hydrogen ion concentration (pH) of paper extracts (hot extraction method)
Automatic review - 5/2020 Current SSIG Count = 5
T 493 cm-10 Identification and determination of melamine resin in paper
Automatic review - 10/2019 Current SSIG Count = 3
T 509 om-15 Hydrogen ion concentration (pH) of paper extracts (cold extraction method)
Automatic review - 10/2019 Current SSIG Count = 7
T 600 om-15 Analysis of formaldehyde in aqueous solutions and of free formaldehyde in resins
Automatic review - 10/2019 Current SSIG Count = 6
T 610 sp-15 Preparation of indicators and standard solutions
Automatic review - 10/2019 Current SSIG Count = 6
T 613 cm-10 Analysis of caustic soda
Automatic review - 10/2019 Current SSIG Count = 4
T 617 cm-10 Analysis of lime
Automatic review - 5/2019 Current SSIG Count = 8
T 618 cm-10 Analysis of limestone
Automatic review - 10/2019 Current SSIG Count = 4
T 619 cm-10 Analysis of salt cake
Automatic review - 5/2019 Current SSIG Count = 7
T 621 cm-10 Analysis of rosin
Automatic review - 10/2019 Current SSIG Count = 4
T 622 cm-10 Analysis of sodium hydrosulfite
Automatic review - 10/2019 Current SSIG Count = 6
T 624 cm-11 Analysis of soda and sulfate white and green liquors
Automatic review - 9/2020 Current SSIG Count = 6
T 628 cm-10 Analysis of rosin size
Automatic review - 10/2019 Current SSIG Count = 4
T 632 cm-11 Analysis of sodium silicate
Automatic review - 5/2020 Current SSIG Count = 4
Fillers and Pigments
T438 cm-06 Zinc and Cadmium in Paper
Draft 2 Current SSIG Count = 9
Optical Properties
T 519 om-17 Diffuse opacity of paper (d/0 paper backing)
Automatic review - 4/2021 Current SSIG Count = 8
T 1214 sp-17 Interrelation of reflectance, R0; reflectivity, R ; TAPPI opacity, C0.89; scattering, s; and absorption, k
Automatic review - 10/2021 Current SSIG Count = 8
T 1219 sp-17 Storage of paper samples for optical measurements and color matching
Automatic review - 10/2021 Current SSIG Count = 8
Physical Properties
T 516 cm-11 Envelope seal, seam, and window patch testing
Automatic review - 5/2020 Current SSIG Count = 7
T 578 sp-16 Accelerated light aging of printing and writing paper by xenon-arc exposure apparatus
Automatic review - 10/2020 Current SSIG Count = 9
Pulp Properties
T 226 cm-11 Specific external surface of pulp
Automatic review - 5/2020 Current SSIG Count = 6
T 263 sp-16 Identification of wood and fibers from conifers
Automatic review - 5/2020 Current SSIG Count = 7
Sulfite and Semichemical Pulping
T 604 cm-09 Sulfur dioxide in sulfite cooking liquor
Draft 2 Current SSIG Count = 6
Building and Industrial Material
The below Standards are also in need of additional participants prior to opening up Ballot 2 this year.
T 1006 sp-15 Testing of fiber glass mats: use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, and thickness
T 1007 sp-15 Sample location for fiber glass mat sheets
T 1008 sp-15 Test conditions for fiberglass mat test methods
T 1009 om-16 Tensile strength and elongation at break for fiber glass mats
T 1011 om-15 Basis weight of fiber glass mats
T 1012 om-15 Moisture content of fiber glass mats
T 1013 om-15 Loss on ignition of fiber glass mats
T 1014 om-15 Moisture sensitivity of fiber glass mats
T 1015 sp-15 Fiber glass mat uniformity (visual defects)
T 1016 om-15 Average fiber diameter of fiber glass mats
Participating in a SSIG is free and open to anyone interested. Join now!
If no progress is made on balancing these SSIGs, then the respective methods may be considered for withdrawal at the next Q&SMC meeting. If you have an interest in becoming a member of either of these SSIGs please contact standards@tappi.org. or visit tappi.org/JoinStandards.
TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.
TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)
