Print this article | Send to Colleague

Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item. 

0304-Process Control & Quality Assurance

9/13/2021 - TIP 0304-25 Understanding formaldehyde management. WGC: Chuck Schaeufele
9/13/2021 - TIP 0304-43 High density papers -- what are they? WGC: Chuck Schaeufele
9/15/2021 - TIP 0304-18 Viscosity reading procedure for flexographic corrugated inks. WGC: Scott Miller
9/17/2021 - TIP 0304-49 Suggestions for developing a box plant quality manual. WGC: Tom Stahl
9/17/2021 - TIP 0304-08 Some questions and answers on gel temperatures and on the gel temperature test for corrugating adhesives. WGC: Tyson Kassell
9/17/2021 - TIP 0304-38 Material safety data sheets - what to look for, how to understand them. WGC: Tyson Kassell

0305-Production

9/14/2021 - TIP 0305-40 Reduction or elimination of ink and/or varnish smear when printing and rotary die cutting in one pass. WGC: Scott Miller
9/17/2021 - TIP 0305-13 Project leader. WGC: Dave Carlson

If you would like to participate in the Working Group to review any of these TIPs, please write to tip@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)