Print this article | Send to Colleague

Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item.

0304 Process Control & Quality Assurance

• 10/07/22 - TIP 0304-73 Checking for coating wear on corrugating rolls
  - WGC: John Semenske

0305 Production

• 10/07/22 - TIP 0305-18 Proper use of pull bands
  WGC: Richard P. Target

0404 Water Removal

• 10/14/22 - TIP 0404-05 Methods of evaluating high velocity dryers
  - WGC: Needed
  
  
• 10/17/22 - TIP 0404-21 Press fabric record book
  - WGC: Philip Wells
  
  
• 10/17/22 -TIP 0404-22 Press section economic evaluation
  - WGC: Richard A. Reese

0420 Maintenance & Mechanical Engineering

• 10/17/22 - TIP 0420-14 Guide for increasing the maximum allowable working pressure of cast iron, ASME constructed paper machine dryers
  - WGC: Needed
  
  
• 10/17/22 - TIP 0425-05 Guidelines for Usage of MAP on Raw Yankee Surfaces
  WGC: Jack Allen

If you would like to participate in the Working Group to review any of these TIPs, please write to tip@tappi.org

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)