Print this article | Send to Colleague

Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item.

0106 – Coating Pigments

07/13/2023 – TIP 0106-06 Kaolin clay pigment index
- WGC: Prakash Malla

0304 – Process Control & Quality Assurance

07/13/2023 – TIP 0304-32 Causes and corrections of common corrugator bonding problems
- WGC: Mark Malinowski

0305 – Production

07/13/2023 – TIP 0305-53 Machinery considerations and selection: yoked scoring slotting section
- WGC: TBD

0404 – Water Removal

07/17/2023 – TIP 0404-66 Thermocompressor Applications for Paper Drying
- WGC: Mike Soucy

0416 – Steam & Power/Energy Management

07/19/2023  – TIP 0416-23 Explanation of recovery boiler leak indications
- WGC: Chris Jackson

0420 – Maintenance & Mechanical Engineering

07/07/2023 – TIP 0420-12 Guidelines for evaluation of liquid ring vacuum pump performance
- WGC: Chuck Wunner

If you would like to participate in the Working Group to review any of these TIPs, please write to tip@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)