Print this article | Send to Colleague

T 1008 sp-24 Test conditions for fiberglass mat test methods (Revision)
T 1015 sp-24 Fiber glass mat uniformity (visual defects) (Revision)
T 1200 sp-24 Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility (Reaffirmation)
T 205 sp-24 Forming handsheets for physical tests of pulp (Reaffirmation)
T 234 cm-24 Coarseness of pulp fibers (Reaffirmation)
T 266 om-24 Determination of sodium, calcium, copper, iron and manganese in pulp and paper by atomic absorption spectroscopy (Reaffirmation)
T 453 sp-24 Effect of dry heat on properties of paper and board (Reaffirmation)
T 458 cm-24 Surface wettability of paper (angle of contact method) (Reaffirmation)
T 527 om-24 Color of paper and paperboard (d/0, C/2) (Reaffirmation)
T 583 pm-24 Extensional viscosity of coating color measured as Euler number using orifice rheometer (New Standard)
T 625 cm-24 Analysis of soda and sulfate black liquor (Reaffirmation)
T 631 om-24 Microbiological enumeration of process water and slush pulp (Reaffirmation)
T 812 om-24 Ply separation of solid and corrugated fiberboard (wet) (Reaffirmation)
T 815 om-24 Coefficient of static friction (slide angle) of packaging and packaging materials (including shipping sack papers, corrugated and solid fiberboard) (inclined plane method) (Revision)
T 825 om-24 Flat crush test of corrugated board (rigid support method) (Revision)
T 834 om-24 Determination of containerboard roll hardness (Reaffirmation)
T 839 om-24 Edgewise compressive strength of corrugated fiberboard using the clamp method (short column test) (Revision)

Special thanks to the SSIG members below for being the Working Group Chairs in the recently published reviews of TAPPI Standards:

Brian Traynor - WGC for T 1008
Brian Traynor - WGC for T 1015
Dennis Crawshaw - WGC for T 205
Todd Bolton - WGC for T 234
Dennis Crawshaw - WGC for T 266
Martti Tuomisto - WGC for T 583
Sharmiza Adnan - WGC for T 625
Ben Frank - WGC for T 631
Ben Frank - WGC for T 812
Sara Young - WGC for T 815
Glenn Rogers - WGC for T 825
Dave Carlson - WGC for T 834
Dave Carlson - WGC for T 839

The TAPPI Standards Department would also like to express its gratitude to all volunteers who participated in the review of those Standards as SSIG members.

Thirteen TAPPI Standards approved as American National Standards

The following TAPPI Standards have been approved as American National Standards by the ANSI Board of Standards Review:

New American National Standards:

T 631 om-24 Microbiological enumeration of process water and slush pulp

Approved reaffirmation of current American National Standards:

T 1200 sp-24 Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility
T 205 sp-24 Forming handsheets for physical tests of pulp
T 266 om-24 Determination of sodium, calcium, copper, iron and manganese in pulp and paper by atomic absorption spectroscopy
T 453 sp-24 Effect of dry heat on properties of paper and board
T 527 om-24 Color of paper and paperboard (d/0, C/2)
T 812 om-24 Ply separation of solid and corrugated fiberboard (wet)
T 834 om-24 Determination of containerboard roll hardness

Approved revision of current American National Standards:

T 1008 sp-24 Test conditions for fiberglass mat test methods
T 1015 sp-24 Fiber glass mat uniformity (visual defects)
T 815 om-24 Coefficient of static friction (slide angle) of packaging and packaging materials (including shipping sack papers, corrugated and solid fiberboard) (inclined plane method)
T 825 om-24 Flat crush test of corrugated board (rigid support method)
T 839 om-24 Edgewise compressive strength of corrugated fiberboard using the clamp method (short column test)

Notices of the approvals of the TAPPI Standards as American National Standards were placed in the June 7th, 2024 and June 14th, 2024 editions of ANSI Standards Action.

Check here the list of TAPPI Technical Information Papers (TIPs) recently published:

TIP 0404-43 Water permeability of press fabrics (Revised)

We extend our special appreciation to the following volunteers who served as Working Group Chairs in the recently published reviews of TAPPI TIPs:

Lawrence Yane - WGC for TIP 0404-43

Please note that the documents available for purchase on tappi.org and the Standards License Platform are updated monthly, usually around the 30th of each month. As a result, there may be a delay between the announcement of publication and their availability online. However, if you are subscribed to online access for Standards and TIPs and urgently require new documents that have not yet been posted, you can submit a request for TIPs to tip@tappi.org or Standards to standards@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)