T 227 om-17 "Freeness of pulp (Canadian standard method)" (Revised)

T 821 om-17 "Pin adhesion of corrugated board by selective separation" (Revised)

T 519 om-17 "Diffuse opacity of paper (d/0 paper backing)" (Revised)

T 827 om-17 "Box blank dimensioning" (Revised)

T 809 om-17 "Flat crush of corrugating medium (CMT test)" (Revised)

T 811 om-17 "Edgewise compressive strength of corrugated fiberboard (short column test)" (Revised)

T 810 om-17 "Bursting strength of corrugated board" (Reaffirmed)

T 448 om-17 "Water vapor transmission rate of paper and paperboard at 23 degrees C and 50% RH" (Revised)

T 413 om-17 "Ash in wood, pulp, paper and paperboard: combustion at 900°C" (Revised)

T 526 cm-17 "Blister resistance of coated paper in heatset printing" (Reaffirmed)

T 400 sp-17 "Sampling and accepting a single lot of paper, paperboard, containerboard, or related product" (Revised)

T 802 om-17 "Drop test for fiberboard shipping containers" (Revised)

TIP 0410-09 "Flow determination by chemical method" (Revised)

TIP 1101-01 "Calculation and partitioning of variance using paper machine scanning sensor measurements" (Revised)

TIP 0502-13 "Guidelines for retention measurements" (Revised)

Special note: Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org.