TIP 0304-38 "Material safety data sheets - what to look for, how to understand them" (Revision)
TIP 0106-06 "Kaolin clay pigment index" (Reinstatement of withdrawn TIP)

Special note: Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org.

The TAPPI Standards regulations require public review of standards that are up for ballot. TAPPI members can view any drafts that are in ballot by logging in to the TAPPI web site (www.tappi.org), clicking on "My TAPPI," and then clicking on the "Standards Public Draft Review" link on the left side of the page. If you would like to review and comment on any draft and are not a member of the corresponding Standard-Specific Interest Group (SSIG), you may view the draft on line or you may request a copy of the draft being balloted by writing to standards@tappi.org. TAPPI members may join SSIGs as permanent members; go to the Subject Category page to download forms for this purpose. Nonmembers of TAPPI may join any SSIG as a voting member; to do so, send a message to standards@tappi.org to receive a copy of the draft and a ballot.

Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting.


T 551 "Thickness of paper and paperboard (soft platen method)" (January 3, 2012)
T 433 "Water resistance of sized paper and paperboard (dry indicator method)" (January 3, 2012)
T 275 "Screening of pulp (Somerville-type equipment)" (January 3, 2012)
T 838 "Edge crush test using neckdown" (January 9, 2012)
T 271 "Fiber length of pulp and paper by automated optical analyzer using polarized light" (January 16, 2012)
T 257 "Sampling and preparing wood for analysis" (January 23, 2012)
T 576 "Tensile properties of towel and tissue products (using constant rate of elongation apparatus)" (January 27, 2012)

T 282 "Hexeneuronic acid content of chemical pulp" is now up for regular review, and was scheduled to be balloted December 9, 2011. However, a check of the Standard-Specific Interest Group (SSIG) shows that we are short on having the minimum number of 10 participants on the SSIG.

We therefore need to add members to the SSIG. If you are interested in this standard, please contact standards@tappi.orgno later than January 3, 2012. Assuming we get enough SSIG members by that time, the ballot will go out shortly thereafter.

Work is now beginning on draft development of a new standard for cellulose nanomaterials. This standard shall establish and define standard terms for cellulose nanomaterial, the different types of cellulose nanomaterials and the hierarchical structure of cellulose nanomaterial terms.

If you would like to join the Standard Specific Interest Group (SSIG) for this standard, and receive a ballot for voting, please notify the Standards Department at standards@tappi.orgor by fax at +1-770-446-6947 no later than January 15, 2012. Please reference WI 3021 in your communication.

The system for review and development of TAPPI Standards requires an announcement of review dates so that any interested TAPPI parties may access the drafts, submit comments, and/or join the Standard-Specific Interest Group (SSIG) to cast an official vote.

Listed below are the Standards that will be up for review in 2012. The date indicated is the target date on which the draft will be posted for review by TAPPI members in the Members Only section of the TAPPI website. On that date, you may go to the home page (www.tappi.org), log on with your member ID and password, place your cursor over "Membership," and select "My TAPPI" from the dropdown box. When your personal page appears, click on the "Standards Public Draft Review" link on the left-hand side. You do not have to be a member of the Standard Specific Interest Group to comment on the draft.

Nonmembers of TAPPI who wish to be part of the voting for any Standard should send a message to standards@tappi.org and request voting membership on the corresponding SSIG, prior to the target ballot date, if possible. Anyone who joins the SSIG before the target balloting date will receive a notice of the ballot. Nonmembers cannot access the drafts online, but they will be sent copies by email upon request after receiving the notice of ballot by email.

If you have joined the Standard Specific Interest Group for any Standard, you will receive a notice for ballot at the proper time with instructions for casting your vote and making your comments. If you wish to join the Standard Specific Interest Group for a particular Standard, please go to the Subject Categories for Standards page or contact the Standards Department at TAPPI (standards@tappi.org), or phone +1-770-209-7276 or fax +1-770-446-6947).

T 839 om-08 Edgewise compressive strength of corrugated fiberboard using the clamp method (short column test) (May 1, 2012)
T 272 sp-08 Forming handsheets for reflectance testing of pulp (sheet machine procedure) (May 4, 2012)
T 452 om-08 Brightness of pulp, paper, and paperboard (directional reflectance at 457 nm) (May 8, 2012)
T 1500 gl-08 Optical measurements terminology (related to appearance evaluation of paper) May 11, 2012)
T 566 om-08 Bending resistance (stiffness) of paper (Taber-type tester in 0 to 10 Taber stiffneess unit configuration) (May 15, 2012)
T 410 om-08 Grammage of paper and paperboard (weight per unit area) (May 18, 2012)
T 437 om-08 Dirt in paper and paperboard (May 22, 2012)
T 550 om-08 Determination of equilibrium moisture in pulp, paper and paperboard for chemical analysis (June 5, 2012)
T 496 sp-08 Specimen preparation for cross directional internal tearing resistance for paper, paperboard and related (June 8, 2012)
T 698 cm-03 Determination of wetting tension of polyethylene and polypropylene films and coatings (modified visking analytical technique) (June 12, 2012)
T 538 om-08 Roughness of paper and paperboard (Sheffield method) (June 19, 2012)
T 563 om-08 Equivalent black area (EBA) and count of visible dirt in pulp, paper and paperboard by image analysis (June 26, 2012)
T 572 sp-08 Accelerated pollutant aging of printing and writing paper by pollution chamber exposure apparatus (July 10, 2012)
T 459 om-08 Surface strength of paper (wax pick test) (July 13, 2012)
T 401 om-08 Fiber analysis of paper and paperboard (July 17, 2012)
T 210 cm-03 Sampling and testing wood pulp shipments for moisture (July 20, 2012)
T 248 sp-08 Laboratory beating of pulp (PFI mill method) (July 24, 2012)
T 268 om-08 Weight-volume measurement of pulpwood (August 7, 2012)
T 230 om-08 Viscosity of pulp (capillary viscometer method) (August 10, 2012)
T 841 cm-03 Edgewise compressive strength of corrugated fiberboard using the Morris method (short column test) (August 14, 2012)
T 829 om-08 Score quality test (August 17, 2012)
T 812 om-08 Ply separation of solid and corrugated fiberboard (wet) (August 21, 2012)
T 835 om-08 Water absorption of corrugating medium: water drop absorption test (August 24, 2012
T 826 om-08 Short span compressive strength of containerboard (September 11, 2012)
T 692 om-08 Determination of suspended solids in kraft green and white liquors (September 14, 2012)
T 428 om-08 Hot water extractable acidity or alkalinity of paper (September 18, 2012)
T 406 om-08 Reducible sulfur in paper and paperboard (September 21, 2012)
T 577 pm-08 Score bend test (September 25, 2012)
T 495 cm-03 Bending number of paperboard ((October 12, 2012)
T 402 sp-08 Standard conditioning and testing atmospheres for paper, board, pulp handsheets, and related products (October 23, 2012)
T 549 om-08 Coefficients of static and kinetic friction of uncoated writing and printing paper by use of the horizontal plane (November 6, 2012)
T 489 om-08 Bending resistance (stiffness) of paper and paperboard (Taber-type tester in basic configuration) (November 13, 2012)
T 491 om-08 Water immersion number of paperboard (November 20, 2012)
T 453 sp-08 Effect of dry heat on properties of paper and board (November 27, 2012)
T 511 om-08 Folding endurance of paper (MIT tester) (December 4, 2012)
T 274 sp-08 Laboratory screening of pulp (MasterScreen - type instrument) (December 11, 2012)

For details on these commonly-used acronyms in the development of TAPPI Standards and TIPs, please see the Standards Guidelines and the TIP Guidelines, or send your questions to standards@tappi.org.

TIP = Technical Information Paper
Q&SMC = Quality and Standards Management Committee
SSIG = Standard-Specific Interest Group
SARG = Standards Advisory Review Group
WI = Work Item
WG = Working Group
WGC = Working Group Chairman
om = Official Method
pm = Provisional Method
sp = Standard Practice
cm = Classical Method
ss = Standard Specification
sg = Standard Guideline
gl = Standard Glossary
wd = Withdrawn Standard
UM = Useful Method

For details on these commonly-used acronyms in the development of TAPPI Standards and TIPs, please see the Standards Guidelines and the TIP Guidelines, or send your questions to standards@tappi.org.

TIP = Technical Information Paper
Q&SMC = Quality and Standards Management Committee
SSIG = Standard-Specific Interest Group
SARG = Standards Advisory Review Group
WI = Work Item
WG = Working Group
WGC = Working Group Chairman
om = Official Method
pm = Provisional Method
sp = Standard Practice
cm = Classical Method
ss = Standard Specification
sg = Standard Guideline
gl = Standard Glossary
wd = Withdrawn Standard
UM = Useful Method

Details on how to search and order TAPPI Standards and TIPs can be found on the TAPPI website's Search and Order page.

All individual TIPs or Standards are available for electronic or paper delivery. For electronic delivery, the documents are e-mailed in PDF format. Hard copy documents can be mailed or faxed, but shipping and handling costs will apply.

For Individual Standards, order Item Number: 0104T____ (Insert Standard number)
For Individual TIPs, order Item Number: 0108____ (Insert TIP number)
For Individual Useful Methods order item number: 0104UM_____ (Insert Useful Method number)

List price: $49; TAPPI member price: $32. There are no shipping or handling charges for electronic documents.

The 2011 collection of Standards, TIPs, and UMs, published in March of 2011, is available on CD. An Individual or Company License for access to the continually updated collection of Standards, TIPs, and UMs via the web is the best way to always have a current set of documents accessible. A print-on-demand version of either the Standards, TIPs, or UMs, current and updated as of the date printed, is also available.
For information and quotes on company licenses, contact Lisa Stephens at lstephens@tappi.org or +1-770-209-7293. For regular orders (including individual online licenses), contact Member Connection at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (international), or order on line at www.tappi.org.

Details on how to search and order TAPPI Standards and TIPs can be found on the TAPPI website's Search and Order page.

All individual TIPs or Standards are available for electronic or paper delivery. For electronic delivery, the documents are e-mailed in PDF format. Hard copy documents can be mailed or faxed, but shipping and handling costs will apply.

For Individual Standards, order Item Number: 0104T____ (Insert Standard number)
For Individual TIPs, order Item Number: 0108____ (Insert TIP number)
For Individual Useful Methods order item number: 0104UM_____ (Insert Useful Method number)

List price: $49; TAPPI member price: $32. There are no shipping or handling charges for electronic documents.

The 2011 collection of Standards, TIPs, and UMs, published in March of 2011, is available on CD. An Individual or Company License for access to the continually updated collection of Standards, TIPs, and UMs via the web is the best way to always have a current set of documents accessible. A print-on-demand version of either the Standards, TIPs, or UMs, current and updated as of the date printed, is also available.
For information and quotes on company licenses, contact Lisa Stephens at lstephens@tappi.org or +1-770-209-7293. For regular orders (including individual online licenses), contact Member Connection at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (international), or order on line at www.tappi.org.