| Archive | Subscribe | Printer-Friendly Version | Advertise | tappi.org | TAPPI Press Catalog | May 2019 |
|
New or Revised Standards, TIPs, and Useful Methods
Check here for the list of TAPPI Technical Information Papers (TIPs) recently published: TIP 0404-66 Thermocompressor Applications for Paper Drying (New) WGC: Mike Soucy. The Standards below were approved for publication in the last SARG meeting on May 7, 2019: (* indicates Standards eligible for submission as American National Standards) 1. * T 230 Viscosity of pulp (capillary viscometer method) 2. * T 282 Hexeneuronic acid content of chemical pulp 3. * T 410 Grammage of paper and paperboard (weight per unit area) 4. * T 496 Specimen preparation for cross directional internal tearing resistance for paper, paperboard and related materials 5. * T 812 Ply separation of solid and corrugated fiberboard (wet) These Standards will be published and available on the TAPPI website within the next 30 days. Special note: Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request for TIPs to tip@tappi.org or for Standards to standards@tappi.org. TAPPI Standards in Ballot
Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting. *T 455 sp-14 Identification of wire side of paper (May 19, 2019) *T 511 om-13 Folding endurance of paper (MIT tester) (May 19, 2019) *T 569 om-14 Internal bond strength (Scott type) (May 19, 2019) *T 656 cm-07 Measuring, sampling, and analyzing white waters (May 19, 2019) *T 804 om-12 Compression test of fiberboard shipping containers (May 19, 2019) T 257 sp-14 Sampling and preparing wood for analysis (May 23, 2019) T 277 sp-14 Macro stickies content in pulp: the “pick-up” method (May 23, 2019) *T 203 cm-09 Alpha-, beta- and gamma-cellulose in pulp (May 26, 2019) *T 207 cm-08 Water solubility of wood and pulp (May 26, 2619) *T 221 cm-09 Drainage time of pulp (May 26, 2019) *T 274 sp-13 Laboratory screening of pulp (MasterScreen-type instrument) (May 26, 2019) *T 529 om-14 Surface pH measurement of paper (May 26, 2019) *T 604 cm-09 Sulfur dioxide in sulfite cooking liquor (May 26, 2019) *T 235 cm-09 Alkali solubility of pulp at 25°C (June 2, 2019) *T 236 om-13 Kappa number of pulp (June 2, 2019) *T 249 cm-09 Carbohydrate composition of extractive-free wood and wood pulp by gas-liquid chromatography (June 2, 2019) *T 428 om-13 Hot water extractable acidity or alkalinity of paper (June 2, 2019) *T 459 om-13 Surface strength of paper (wax pick test) (June 2, 2019) *T 494 om-13 Tensile properties of paper and paperboard (using constant rate of elongation apparatus) (June 2, 2019) *T 820 cm-09 Flexural stiffness of corrugated board (June 2, 2019) *Indicate Standards that had their deadline for voting extended due to issues with the migration of the TAPPI Standards Online Balloting System. To have more information about it, please check Section "Announcements". The TAPPI Standards regulations require public review of standards that are up for ballot. Send a message to standards@tappi.org if you want to request a copy of the draft in ballot. If you would like to participate in the SSIGs that review and vote on the Standards, please contact TAPPI Standards Department at standards@tappi.org. TIPs under review
Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item. 0404 - Water Removal 4/29/19 TIP 0404-64 Press fabric guiding. WGC: Dave Burton 4/29/19 TIP 0404-04 Recommended tensions in dryer fabrics. WGC: Greg Wedel 4/29/19 TIP 0404-50 Paper machine room ventilation guidelines. WGC: Jeff Reese If you would like to participate in the Working Group to review any of these TIPs, please write to tip@tappi.org. General Announcements
IMPORTANT NOTICE: Migration of the Standards Online Balloting System TAPPI Standards Online Balloting System, Kavi, migrated on March 25, 2019 to TAPPI Connect. This means that the website that is now hosting the current balloting system (Workspace) is TAPPI Connect. Since then, SSIG members will get access to the balloting system with their TAPPI Connect login and password (this is the same login and password that you use to login to tappi.org). If you don’t have a TAPPI Connect account yet, you may set up one through this link: https://connect.tappi.org/register. The migration was performed by HigherLogic, the company who now owns Kavi. Although the new Workspace looks very similar to Kavi, some SSIG rosters were not migrated correctly, which may have caused some SSIG members to experience issues when trying to log in to the Workspace through Connect. TAPPI has been working tirelessly with HigherLogic to have the rosters and other functionalities working properly. Some progress has been done, but final adjustments are still needed. Until those issues are resolved, any ballots that were in progress on the migration day will continue to have their deadlines postponed. Also, no new ballots will be opened until the rosters are accurate. If you have already voted on any ballot, there is no need to vote again. If you are experiencing any difficulties when trying to log in to TAPPI Connect or when trying to vote, please contact Kristin Whitman kwhitman@tappi.org. She is our web specialist in TAPPI Connect and will review your situation individually. Once the balloting system is working properly, you will receive a new message from TAPPI informing you that a last extension of the deadline will be granted. On behalf of TAPPI, I apologize for the inconvenience that this situation might have caused. Thank you very much for dedicating your time and knowledge to review TAPPI Standards! Best regards, Priscila Briggs Standards Manager standards@tappi.org Members for Working Groups of TIPs needed
WGC needed
0304-20 Calibration of flexible beam crush tester
0304-23 Statistical process control pin adhesion 0304-24 Calibration and maintenance of the burst tester 0304-25 Understanding formaldehyde management 0304-26 Common curtain coating problems: causes, detection and correction 0304-37 How to prevent score cracking in a box plant 0304-46 Techniques for running "WRA" (water resistant starch adhesive) 0304-60 A procedure to proof a flexo printing ink 0304-72 Critical properties to consider when unitizing 0305-06 Machinery considerations and selection 0305-23 Rotary cutting die maintenance 0305-32 Housekeeping at order and shift change and weekly 0305-34 Daily, weekly, and monthly maintenance press checklists 0305-35 Rotary diecutter urethane anvil maintenance 0305-38 Troubleshooting the printing section 0305-43 Extruded glue mechanism supplement 0305-49 Checklist: preparing diecuts for shipment 0305-54 Material handling considerations for flexo folder gluers 0306-06 Drying and curing techniques for in-line flexographic printing 0410-05 Head of stock behind slice (head/jet and slice flow rate relationships) 0410-08 Control of stock jump on a fourdrinier wire 0410-10 Weirs and flumes 0410-14 Generalized method for determining the pipe friction loss of flowing pulp suspensions 0410-15 Optimum consistency for pumping pulp If you would like to join a Working Group of a TIP, please write to tip@tappi.org for more information.
SSIG Members Needed
Acronyms You May Need to Know
For details on these commonly-used acronyms in the development of TAPPI Standards and TIPs, please see the Standards Guidelines and the TIP Guidelines, or send your questions to standards@tappi.org or tip@tappi.org. TIP = Technical Information Paper Searching and Ordering TAPPI Standards, TIPs, and Useful Methods
Details on how to search and order TAPPI Standards, TIPs and Useful Methods can be found on the TAPPI website's Search and Order page. For Individual TIPs, order Item Number: 0108____ (Insert TIP number) For Individual Standards, order Item Number: 0104T____ (Insert Standard number) For individual Useful Methods, order Item Number 0104UM____ (insert UM number)
The 2018 collection of Standards, TIPs, and UMs, published in January of 2018 (product code STUCD-18), is available on CD. An Individual or Company License for access to the continually updated collection of Standards, TIPs, and UMs via the web is the best way to always have a current set of documents accessible. A print-on-demand version of either the Standards, TIPs, or UMs, current and updated as of the date printed, is also available. For information and quotes on company licenses, contact TAPPI Press (press@tappi.org) or +1-770-209-7277. For regular orders (including individual online licenses), contact Member Connection at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (international), or order on line at www.tappi.org. TAPPI Standards, TIPs and Useful Methods Online Subscription gives you point-and-click access, providing immediate answers anytime problems arise. You’ll save $186 alone by purchasing a subscription to Standards, TIPs and Useful Methods Online along with a TAPPI membership. This offer also applies each year you renew your membership. By joining TAPPI, you receive substantial savings on all TAPPI events, products and services and receive Paper 360, TAPPI Journal and Specialty Newsletters. Combine the Power of TAPPI Membership and the Quality of Performance by purchasing a TAPPI membership along with Standards online. Be a part of the TAPPI Community. TAPPI Membership $174 + Standards Online $125 = $299 with membership renewal TAPPI Standards, TIPs and Useful Methods – on demand – anytime, anywhere. Individual Access and Company license
www.tappi.org/standardsonline
Standards Guidelines
http://www.tappi.org/content/pdf/standards/tm_guidelines_complete.pdf
TIPs Guidelines
http://www.tappi.org/content/pdf/standards/tip_guidelines_complete.pdf
|
|
TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standards or TIPs. This message is being sent to you because of your affiliation with TAPPI; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.
TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Suite 115 | Peachtree Corners, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)
TAPPI Privacy Policy
