STAR
TAPPI
TIP 0305-54 "Material handling considerations for flexo folder gluers" (Revision)
TIP 0304-58 "An explanation of the CONEG heavy metal guidelines" (Revision)
Special note: Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org.
The TAPPI Standards regulations require public review of standards that are up for ballot. Send a message to standards@tappi.org if you want to request a copy of draft in ballot.
Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting.
T 650 "Solids content of black liquor" (March 13, 2014)
Getting started is easy. Do you have just a general idea for a standard, or are you farther along and have a substantial draft? If you just have a general idea for a standard or TIP, complete the New Idea Submission Form. TAPPI will review your idea and identify an appropriate committee or group to work on your suggestion. If you are further along, send an initial draft to standards@tappi.org. From there, the TAPPI Standards Manager will guide you through the appropriate process to finalize and approve the new document.
As part of the celebration, TAPPI and the American National Standards Institute (ANSI) have invited ISO Technical Committee TC 6 and its subcommittees and working groups to hold its 2015 meeting during the PaperCon week.
To keep up with the 100th Anniversary plans, there's a special website: http://www.tappi100years.org. On this site you can also sign up for the special newsletter for this event.
This Spring, the Standards Advisory Review Group (SARG) and Quality and Standards Management Committee will both meet during PaperCon 2014, April 27-30 in Nashville.
PaperCon 2014, TAPPI’s largest annual event, focuses on new ways to run more profitably and stay competitive. The Papermaking Program covers a number of topics guaranteed to give you great ideas to take back to the mill. Learn to optimize your machine(s) through innovations in web imaging systems, improving pressing efficiency, wet end optimization, and vacuum systems upgrades. The Coating & Graphic Arts Program focuses on the future of printing and its demands on paper and board coating. In addition to mill manager and superintendent panels, the PIMA Management Program features sessions on reliability, training operators of the future, safety and lean manufacturing. Register now for best rates.
Your registration to PaperCon also includes full access to these programs:
Tissue360° Forum, OpEx Reliability Workshop, RPTA P-T Seminar, and Innovative Nonwovens Conference (NETInc). Learn more about PaperCon.
Many top experts in our industry are involved in the development of Standards and TIPs which help them – and you – do your jobs better and more efficiently. Why should you be involved? Not only does your experience and expertise add to the process, but it also solidifies professional prestige. You can provide input on Standards in areas such as:
• Pulp & Paper
• Packaging
• Nanotechnology
• Workplace training
• Nonwovens
• Bioenergy
If you would like to propose an idea for a new Standard or TIP, please email: standards@tappi.org. TAPPI’s Standard Specific Interest Groups (SSIGs) are the consensus body that develop and review Standards. Each Standard has its own SSIG. If you would like to participate in an SSIG, visit www.tappi.org/participateinstandards.
The system for review and development of TAPPI Standards requires an announcement of review dates so that any interested TAPPI parties may access the drafts, submit comments, and/or join the Standard-Specific Interest Group (SSIG) to cast an official vote.
Listed below are the Standards that will be up for review in 2014. The date indicated is the target date on which the draft will be distributed to the Standard-Specific Interest Group (SSIG) for that particular Standard.
Any interested individuals who wish to be part of the voting for any Standard should send a message to standards@tappi.org and request voting membership on the corresponding SSIG, prior to the target ballot date, if possible. Anyone who joins the SSIG before the target balloting date will receive a notice of the ballot.
If you have joined the Standard Specific Interest Group for any Standard, you will receive a notice for ballot at the proper time with instructions for casting your vote and making your comments. If you wish to join the Standard Specific Interest Group for a particular Standard, please go to the Subject Categories for Standards page or contact the Standards Department at TAPPI (standards@tappi.org), or phone +1-770-209-7276 or fax +1-770-446-6947).
T 1006 sp-10 Testing of fiber glass mats: use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, air permeability, and thickness (May 6, 2014)
T 702 om-10 Rheological measurements for characterization of polyolefins:low-density polyethylene (LDPE) for extrusion coating (May 20, 2014)
T 1007 sp-10 Sample location for fiber glass mat sheets (May 27, 2014)
T 840 om-10 Testing adhesives used in glued lap joints of corrugated fiberboard containers (June 10, 2014)
T 1008 sp-10 Test conditions for fiberglass mat test methods (June 17, 2014)
T 844 pm-10 Determining construction (nominal basis weight) of corrugated board (June 24, 2014)
T 1009 om-10 Tensile strength and elongation at break for fiber glass mats (July 1, 2014)
T 546 om-10 Machine-direction grammage variation measurement (gravimetric method) (July 8, 2014)
T 1012 om-10 Moisture content of fiber glass mats (July 15, 2014
T 553 om-10 Alkalinity of paper as calcium carbonate (alkaline reserve of paper) (July 22, 2014)
T 1013 om-10 Loss on ignition of fiber glass mats (August 5, 2014)
T 560 om-10 CIE whiteness and tint of paper and paperboard (d/0 geometry, C/2 illuminant/observer) (August 12, 2014)
T 1014 om-10 Moisture sensitivity of fiber glass mats (August 19, 2014)
T 200 sp-10 Laboratory beating of pulp (Valley beater method) (September 2, 2014)
T 562 om-10 CIE whiteness and tint of paper and paperboard (45/0 geometry, C/2 illuminant/observer) (September 9, 2014)
T 1015 sp-10 Fiber glass mat uniformity (visual defects) (September 23, 2014)
T 403 om-10 Bursting strength of paper (September 30, 2014)
T 1016 om-10 Average fiber diameter of fiber glass mats (October 7, 2014)
T 411 om-10 Thickness (caliper) of paper, paperboard, and combined board (October 14, 2014)
T 456 om-10 Tensile breaking strength of water-saturated paper and paperboard ("wet tensile strength") (October 21, 2014)
T 555 om-10 Roughness of paper and paperboard (print-surf method) (October 26, 2014)
T 541 om-10 Internal bond strength of paperboard (z-direction tensile) (November 4, 2014)
T 558 om-10 Surface wettability and absorbency of sheeted materials using an automated contact angle tester (November 11, 2014)
T 454 om-10 Turpentine test for voids in glassine and greaseproof papers (November 18, 2014)
T 465 sp-10 Static creasing of paper for water vapor transmission tests (November 26, 2014)
T 267 cm-05 Compression wood identification in pulpwood (December 2, 2014)
T 213 om-10 Dirt in pulp - chart method (December 9, 2014)
T 220 sp-10 Physical testing of pulp handsheets (December 16, 2014
For details on these commonly-used acronyms in the development of TAPPI Standards and TIPs, please see the Standards Guidelines and the TIP Guidelines, or send your questions to standards@tappi.org.
TIP = Technical Information Paper
Q&SMC = Quality and Standards Management Committee
SSIG = Standard-Specific Interest Group
SARG = Standards Advisory Review Group
WI = Work Item
WG = Working Group
WGC = Working Group Chairman
om = Official Method
pm = Provisional Method
sp = Standard Practice
cm = Classical Method
ss = Standard Specification
sg = Standard Guideline
gl = Standard Glossary
wd = Withdrawn Standard
UM = Useful Method
Details on how to search and order TAPPI Standards, TIPs and Useful Methods can be found on the TAPPI website's Search and Order page.
For Individual TIPs, order Item Number: 0108____ (Insert TIP number)
For Individual Standards, order Item Number: 0104T____ (Insert Standard number)
For individual Useful Methods, order Item Number 0104UM____ (insert UM number)
List price: $49; TAPPI member price: $32. There are no shipping or handling charges for electronic documents.
The 2013 collection of Standards, TIPs, and UMs, published in March of 2013 (product code STUCD-13), is available on CD. An Individual or Company License for access to the continually updated collection of Standards, TIPs, and UMs via the web is the best way to always have a current set of documents accessible. A print-on-demand version of either the Standards, TIPs, or UMs, current and updated as of the date printed, is also available.
For information and quotes on company licenses, contact Jeff Wellsat jwells@tappi.org or +1-770-209-7228. For regular orders (including individual online licenses), contact Member Connection at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (international), or order on line at www.tappi.org.
TAPPI Standards, TIPs and Useful Methods Online Subscription gives you point-and-click access, providing immediate answers anytime problems arise.
You’ll save $186 alone by purchasing a subscription to Standards, TIPS and Useful Methods Online along with a TAPPI membership. This offer also applies each year you renew your membership.
By joining TAPPI, you receive substantial savings on all TAPPI events, products and services and receive Paper 360, TAPPI Journal and Specialty Newsletters.
Combine the Power of TAPPI Membership and the Quality of Performance by purchasing a TAPPI membership along with Standards online. Be a part of the TAPPI Community.
TAPPI Membership $174 + Standards Online $125 = $299
Non-members Standards Online = $485
TAPPI Standards, TIPS and Useful Methods – on demand – anytime, anywhere.
