Standards Revision Projects Beginning Summer 2020

The SSPC committees listed below are scheduled to begin periodic review and revision of their associated consensus documents starting in the summer of 2020. If you’d like to join any of the review committees or obtain more information, please contact Aimée Beggs (beggs@sspc.org).  Voting memberships on committees close when the first formal ballot of a draft is issued, so act quickly!

C.1.1, Zinc-Rich Coatings Committee – SSPC-Paint 29, Zinc Dust Sacrificial Primer, Performance-Based; SSPC-PS Guide 12.00, Guide to Zinc Coatings; SSPC-PS 12.01, One-Coat Zinc-Rich Painting System, SSPC-Paint 30 Weld-Through Inorganic Zinc-Primers

C.1.3.A, Coal Tar Coatings ­­ – SSPC-Paint 16, Coal Tar Epoxy Coating; SSPC-Paint 32, Coal Tar Mastic Coating; and SSPC-Paint 33, Coal Tar Emulsion Coating

C.1.12, Painting Galvanized Steel – SSPC-Guide 19, Selection of Protective Coatings for Use Over Galvanized Substrates

C.2.1, Non-Metallic Abrasives – SSPC-AB 1, Mineral and Slag Abrasives

C.2.3, Power Tool Cleaning – SSPC-SP 11, Power-Tool Cleaning to Bare Metal, and SSPC-SP 15, Commercial Grade Power-Tool Cleaning

C.2.16, Ferrous Metallic Abrasives – SSPC-AB 2, Cleanliness of Ferrous Metallic Abrasives; and SSPC-AB 3, Ferrous Metallic Abrasives

C.2.24, SSPC-TR 2/NACE 6G196 – Joint Wet Abrasive Blast Cleaning Technical Report

C.5.3.A, Containment of Hazardous Surface Preparation Debris – SSPC-Guide 6, Guide for Containing Surface Preparation Debris Generated During Paint Removal Operations

C.5.3.B, Disposal of Hazardous Surface Preparation Debris ­– SSPC-Guide 7, Guide to the Disposal of Lead-Contaminated Surface Preparation Debris

C.5.3.C, Environmental Monitoring of Hazardous Coating Removal Projects ­– SSPC-TU 7, Conducting Ambient Air, Soil, and Water Sampling During Surface Preparation and Paint Disturbance Activities